Post Frame Building Materials
We at Countryside Builders have the expertise to design and build the project of your dreams. We only use the finest materials in our industry to ensure that the finished project will be both functional and long-lasting. We are custom builders who can design a building based on your specifications – “if you can draw it, we can build it!”
Features on our buildings run from the ordinary to the extraordinary, Walk doors, overhead garage doors, sliding doors, insulation, overhangs, steel liners, partition walls, lofts, cupolas…these are just a few of the quality features we can offer to meet your needs. Please visit RC Buildings to see a full list of the quality materials and features available through Countryside Builders.
Post Anchor
16′ Diameter Holes
4′ Deep from Level Grade
80#’s of 5,000# Concrete Mix for Pad
80#’s of 5,000# Concrete Mix for Anchor
Total of 160#’s used. Buildings wider than 60′ have an additional 80#’s added.
6x6 Treated Post Grade #2 and Better
Yellow Pine 6×6 Posts are Kiln Dried before treating, this allows Treatment to follow the Grain of Wood from Ends of Post for 100% Penetration of Sapwood.
Minimum of.60 CCA Pressure Treatment. No Splices. 6×6’s have 5 1/2 more square inches of wood than 3-2×6’s that is 22% more.
#1 Yellow Pine
All #1 Yellow Pine Lumber used throughout building. Stronger, holds fasteners better.
Corner Braces #1 YP
Standard at each corner.
2×4 Wall Girts #1 YP
2x4 Strip Sheathing #1 YP
2×4 Strip Sheathing on top of trusses
Lapped one foot at splices
2×6 Eave Boards #1 YP
Post Notch
6×6 Posts are notched for direct support of truss. Truss is nailed and Bolted
Knee Brace #1 YP
Double 2×4 Knee Braces are used for additional strength.
Trusses
D.S.S. and M.S.R. Lumber
Straight Bottom chord is standard. Allows full clearance throughout building. Minimum 32# per sq. ft Roof Load. With Standard Truss Spacing 8′ oc.
End Wall Post
End wall posts go to top of end wall for additional strength
Optional Concrete Foundation
Concrete Foundation with 4×6 Treated Plate and U-Post Brackets.
Optional Plasti-Sleeve Post Protectors
A one piece molded plastic sleeve with an enclosed bottom designed to fit post cleanly.
Made from a high quality HDPE plastic which has an in-ground decay resistance of hundreds of years.
Protects against post rot, decay or insect attack. Length 5’6″
2-Piece Sliding Door Center
Center Door Guide on a 6×6 post buried in the center of the door opening with concrete.
All components are made of heavy steel. 2-piece Door Centers are 2-ply 2×4’s for added Strength.
Sliding Door Stay
Prevents door from closing on its own while open.
Sliding Door Jamblatch
7-inch hook and powerful cam-action pulls the door securely against the jamb. Eliminates rattling and wind damage. Opens inside only.
Sliding Door Bottom Guide
Door rolls easy. No binding or catching on the smooth mated surfaces
2×6 Center Match
2 rows of treated #1 Yellow Pine 2×6 Center Match Standard on buildings.
Steel I-Beams
Engineered Steel I-Beams used for side door headers. Full clearance side door same height as end door.
Finished Interior
Liner Panel with optional 6″ R-19 Fiberglass Insulated Sides and optional 9″ R-30 Fiberglass Insulated Ceiling Double Framed Wall
Call us for more information on material and warranties – 618-466-6337
Material specifications shown are subject to change without notice